Unlock/Flash Sony Ericsson w300 :: Total Multi-Server tutorial
Software controls and their explanation
|
- Help : Display available help on selected phone and model
- Brand & Model : Dropdown lists to select needed phone brand and model
- Unlock Menu : Click to activate unlock menu and access unlocking functions
- Unlocking options : Unlock phone, Reset user/lock code, Read phone user/lock code,
Clear total call time counter, Disable shutter sound
- Make Selected Jobs : Press to perform the selected functions ( credit discounted )
Read CID/Test Cable : Use this button to test if cable is compatible. ( no credit discounted )
Recover Phone : Use this when phone is totally damaged or unrecognizable by TMS software.
This can also be used when getting 'Unsupported CID' message with phone that was supported
by the software before.
Make sure that all required flash files are a available in 'Download area' as phone
will have to be flashed after using 'Recover Phone' function
- Port : Select from available com ports
Problem determining which port to select?
- Cable Speed : Select lower speed for more stable connection
- DTR, RTS options : Check/Uncheck if phone can not connect to PC
- Original Sony Ericsson PC-Suite USB Cables :
Select one of the checkboxes for the cable you are using
- Username & Password : Enter username and password
- Info : Press to check available credits
- Download area : Access to download area
- Generate ATS : Check to enable ATS error reporting. In case of error email .ats
and .jpg files located in program folder to
Installation and setup
- Download unlocking software and drivers (use login info you received from us)
Download link
- Using Winzip or
Winrar extract the content of the file.
Cables used with Total Multiserver and driver installation
Use only cables compatible with the unlock software.
See
cable compatability chart to determine which cable fits your phone.
Multiserver
or
Cruiser
cables require drivers to be installed prior to connecting the phone.
- Connect cable to a vacant USB port on your PC. Cruiser cable is
externally powered and requires a 3 volt power source (equivalent of 2 AA batteries).
- Windows will prompt you with a dialogue box
- Select "No, not this time" and click "Next"
- On the next screen select a lower option
"Install from a list or specific location" and proceed to the next step by clicking
"Next"
- Choose location where you extracted the content of the downloaded file
then click "Next"
- When prompted with a Windows Logo testing dialogue select "Continue
Anyway"
- Drivers are now installed
Note:
With
DSS-20, DSS-22, DSS-25,
DCU-60,
Mini-USB
cables use original drivers supplied with those cables.
Phone connection problems?
Unlocking : Sim lock, Network lock
Sony Ericsson W300
- Make sure your mobile phone's battery is fully charged.
Battery discharge during unlocking/flashing process may damage the phone.
- Power off phone, remove battery and sim card, reconnect battery and connect
cable to phone and PC. Phone has to be off.
Compatible cables.
- Enter username and password, select phone and model from the dropdown list [2].
- Click 'Unlock Menu' tab [3] and select required unlocking options [4].
- Check off 'Generate ATS' option.
- Press 'Make Selected Jobs' [5] and follow the on-screen instructions.
Unlocking for SonyEricsson w300 requires ONE credit.
Unlocking : Security Code
Sony Ericsson W300
Security code allows access to the main user area of the phone. It is also known as:
- Security Code
- User Code
- Phone Code
- Lock code
Please note, PUK and PIN codes can't be recovered by this method, you have to contact your
service provider for that.
Security code unlock is free when doing sim unlocking.
It requires only 1 credits to perform both operations.
- Make sure your mobile phone's battery is fully charged.
Battery discharge during unlocking/flashing process may damage the phone.
- Power off phone, remove battery and sim card, reconnect battery and connect cable
to phone and PC. Phone has to be off.
- Enter username and password, select phone and model (Sony Ericsson W300)
from the dropdown list [2].
- Click 'Unlock Menu' tab [3] and check off "Unlock Phone + Reset User/Lock Code"
or "Read Phone User/Lock Code" checkboxes [4]. The former unlocks service provider
lock along with resetting security code. Selecting the other option will just read the
security code from your cell phone.
- Check off 'Generate ATS' option.
- Press 'Make Selected Jobs' [5].
- When prompted shortly press phone's "Power" button and follow the on-screen
instructions. Note that phone has to stay off all the time.
Security Code unlocking for SonyEricsson w300 requires ONE credit.
Flashing : Firmware upgrade, Debranding, Decustomising, Repair
Sony Ericsson W300
This function also repairs phones with blinking and white screen (a.k.a.
White Screen of Death), mobile phones with
message 'Configuration error, Please contact your network operator or service center'.
To enable all the features of the upgraded firmware it is recommended to do settings reset
after performing this flashing procedure. For this go to
Menu ->
Settings ->
Master Reset ->
Reset Settings
- Make sure your mobile phone's battery is fully charged.
Battery discharge during unlocking/flashing process may damage the phone.
- Power off phone, remove battery and sim card, reconnect battery and connect cable to phone and PC.
- Enter username and password, select phone and model (Sony Ericsson W300)
from the dropdown list [14].
- Check off 'Generate ATS' option.
- Enter download area [12]. The list of
available files will appear in the output window [20]. Select and download firmware
file of the latest date and version (e.g. R7B039 on the picture) and required
language file. Note, that the version of both Firmware and Language files MUST match.
Explanation of language acronyms.
- Click 'Flash Menu' tab [15] and select previously downloaded firmware [16]
and default language [17].
Both files have to be flashed at the same time.
- Press 'Program Files to Phone Memory' [19].
- When prompted shortly press phone's "Power" button and follow the on-screen
instructions. Note that phone has to stay off all the time.
Firmware + Language Flashing for SonyEricsson w300 requires ONE credit.
Flashing : Language Change
Sony Ericsson W300
This function also repairs phones with blinking and white screen, mobile phones with
message 'Configuration error, Please contact your network operator or service center'.
To enable all the features of the upgraded firmware it is recommended to do settings reset
after performing this flashing procedure. For this go to
Menu ->
Settings ->
Master Reset ->
Reset Settings
- Make sure your mobile phone's battery is fully charged.
Battery discharge during unlocking/flashing process may damage the phone.
- Power off phone, remove battery and sim card, reconnect battery and connect cable to phone and PC.
Phone has to remain switched off.
- Enter username and password, select phone and model (Sony Ericsson W300)
from the dropdown list [16].
- Check off 'Generate ATS' option.
- Enter download area [12]. The list of
available files will appear in the output window [20]. Select and download firmware
file of the latest version (e.g. R7B039 on the picture) and required
language file. Note, that the version of both Firmware and Language files MUST match.
Explanation of language acronyms.
- Click 'Flash Menu' tab [15] and select previously downloaded firmware [16]
and default language [17].
Both files have to be flashed at the same time.
- Press 'Program Files to Phone Memory' [19].
- When prompted shortly press phone's "Power" button and follow the on-screen
instructions. Note that phone has to stay off all the time.
Language change for SonyEricsson w300 requires ONE credit.
