History of Changes

• Show carrier information
• Show phone lockstatus
• Only needs IMEI to get information
• Secure and Fast transactions
• And last but not least we are the fastest

• Built from scratch
• More startup stability
• Much better smartcard initialization routines
• 2x faster (previous boot main fw update - ~20secs, new one ~11secs)
• USB 3.0 Compatibility == 4x faster from Initial Bootloader!
  Upgrade box using new bootloader, usb 3.0 mode

• Sony Ericsson Xperia Unlocker introduced (this is 3rd party addon)
  
  Supported Phones :
  Xperia X10 Mini - E10i
  Xperia X10 Mini Pro - U20
  Xperia X8 - E15i
  Xperia W8 - E16 - E16i
  Xperia X10
  Xperia X10i
  Xperia X10a
  Docomo SO-01B
  All These Phones supported without TEST POINT
• Added Real time SE Xperia Unlocker account Creator in 'Credits' tool. (This is the best option for Online web shop resellers as Addon works without Box) Reseller can generate accounts real time with box) 10 Cyclone credits = 1 Xperia phone log
• BB5 FBUS/USB Loaders v11.40.00 Introduced
• Introduced previous updates (standalone and free Broadcom unlocking, RAPUv21, etc)
• PM Protection is now unticked by default
• PM Protection is automatically unticked during SX4 operations
• Full Erase for New Protocol APE phones fixed (wrong CMT Flash Device Index selected)
• Added New bright skin
• Minor changes and Bugfixes

• Broadcom Unlocking (via LBF Hash Read)/SX4 Authorization/SD Repair/etc is now fully FREE and STANDALONE, just simply as previous models. No internet connection and credits needed.
• Added support for reading Unique Data files for Broadcom 21351 based Nokia Phones (Nokia X2, C3, .. and more of them).
  After read Unique Data you can:
  • Unlock SP locks by reading LBF data
  • Backup FULL RPL (including superdongle) 100% Nokia-Like
  • Repair corrupted Superdongle keys
  • Authorize your phone with SX4 emulation inside box
  • Detailed Security Analysis
  • Downgrade this phones

• Added new Blackberry MEP-175683-003 (MTS Moscow, North-West GSM, KB Impuls BeeLine) and
• Added free SuperBB5 (sl3direct) routines.
• Added PA_SIMLOC30 Original Nokia RPL Write support in SIMLOCK2 format
• The NCK length is now automatically recognized upon RPL write, so correct NCK array lenght might be assumed

• Added FIRST IN THE WORLD, FREE, STANDALONE SL3 UNLOCK by BF FOR LATEST TI BASED NOKIA PRODUCTS (RAPUV2 CPU) this includes Nokia 500, Nokia 600, Nokia 700, Nokia 701 and probably more coming !!!!!! These products are 15 NCK chars so not to worry. We recommend FFS Pro2 Cables
• Added FIRST IN THE WORLD, FREE, STANDALONE SUPERDONGLE REPAIR for RAPUv2 Based Phones
• Added FIRST IN THE WORLD, FREE, STANDALONE SX4 AUTHORIZATION for RAPUv2 Based Phones
• Added FIRST IN THE WORLD, FREE, STANDALONE "FULL RPL" BACKUP (include SUPERDONGLE) for latest RAPUv2 phones
• Added FIRST IN THE WORLD, FREE, STANADLONE DOWNGRADE CAPABILITY for latest RAPUv2 phones
• Added FIRST IN THE WORLD, FREE, STANDALONE Full Security analysis for RAPUv2 phones
• Supported interfaces: USB and FBUS
• Small bug fixes, i.e. PM protection is now unticked by default

• New BB5 FBUS/USB Loaders v11.24.00 Introduced
• Added Dead USB Flashing for RAPIDO and other FUR-over-USB operations (DO NOT USE FOR CERTIFICATE READ/WRITE!), still "old method" avaiable in connection tab.
• Certificates operations for Rapido FBUS-OVER-USB disabled, because is not supported by loaders ( it will fail without any attempt )
• Rapido Alive FUR-over-USB flashing not supported, flash those phones by Dead variant instead (Switch to RAW mode problem in this models..), or "Old USB Flashing Method"
• "Use OLD USB FLASHING METHOD" moved to BB5/Flashing tab
• "Settings" tab renamed to Connection
• TX2 settings removed from BB5 Flashing Tab
• RAPU Flashing/Booting Improved
• C2-02 XGold2 Flashing "Added" - Cyclone has flashing compatibility for this model, but MassMemory file couldn't be handled because too big. Fixed.
• BB5 Mass Memory Flashing Tested - Cyclone SW has this possibility from long time ago...
• Added "Read Unique Data" button. Use to boot phone by Flashbus directly, and dump Unique Data (for Simlock,SD,...) when phone doesn't have correct BSI resistors value. Dumped unique data might be lately used for USB operations if still FBUS operations fails.
• Old DCT4 Asic 2,5,6,7 Direct Unlock/Relock/Autolock Introduced, finally
• Standalone DCT4 RPL Calculation Introduced, supported Asics: 2,5,6,7,11
• Added support for DCT4 (7250i, 6610i, 2125i, 2865i, 6275i) Product Data RPL Entity Writing for fixing CS
• Added support for generating extended DCT4 RPL with Product Data for above models (CS problems)
• Alcatel Calculator added to gui
• PMM Protection Checkbox added upon PM write. Use to protect PM security fields.
• Diagnostic Module Added
• Selftests moved to new "Diagnostic" module
• Vibra Tests Added
• Backlight Tests Added
• "Autodetect" added for DCT4 Unlocking. Unique method - non ASIC dependent (i.e. avoids RM-189 2310 problems available on all boxes right now). If there is problems with auto-detection - user still can select unlocking method manually.
• Removed DCT4 ASK-RPL From Credits Manager
• Removed SuperDCT4 Activation from Credits Manager
• Status Bar messages are more accurate now
• Added "Auto-Rebuild IMEI" checkbox for "Read UEM IMEI" function. Used to automatically generate FLASH IMEI DATA and program it - one-click REPAIR ??????????????4.
• CacheV2 Introduced
• XGold1/2 Flashing Routines rewritten to be more memory effective
• Dead-erased XGold2 flashing improved, plus added some messages regarding to reviving dead XG2
• USB Connection Type is now selected automatically when XGold2 platform found
• The supported MEP List are now acquired from box once Blackberry Tool launch
• Moved UEM stuff to new "ASK/RPL Tool"
• XGold2 MassMemory flashing added
• Remaining XGold Credits are now shown upon launching of Nokia Tool (Those one used for XGold1 LBF, Blackberry Codes Service, etc)
• Default Security Area XGold Service count increased from 50 to 100 (100 phones limit between SA updates for BlackBerry, XGold1,...)
• XGold/Blackberry service is now also checked upon Blackberry tool startup, also after each Code calculation remaining Calculation Limit is displayed
• Relock files updated for DCT4
• AutoUpdater Introduced
• USB Flashing Solved due to wrongly installed Flashing Cable Drivers on some configurations (i.e. Virgin PC)
• Database Unlock Introduced
• RPL Write revised
• PARTNERC certificate support added for Certificate Read
• PARTNERC certificate support added for Certificate Write
• PARTNERC certificate support added for RPL Operations
• Erase files support added
• DCC configuration for NIMMIIIIRRFF06150000 added
• DCC configuration for NIMMIIIIRRFF095A1F05 added
• DCC configuration for NIMMIIIIRRFF095A1F04 added
• DCC configuration for NI00IIIIRR0306150018 added
• DCC configuration for NIMMIIIIRRFF095B1F05 added
• DCC configuration for NIMMIIIIRRFF0102F201 added
• DCC configuration for ISL2TI0200000103B840 added
• DCC configuration for 8600030001040A021001 added
• DCC configuration for 860003000104094B2F01 added
• DCC configuration for 86000300010401035424 added
• DCC configuration for NI00BC000003095B1F00 added
• DCC configuration for NI00BC0000030102F203 added
• DCC configuration for NI00BC0000030102F202 added
• DCC configuration for NI00BC000003095B1F05 added
• DCC configuration for NI00BC000003095B1F01 added
• DCC configuration for NI00IIIIRR030C213402 added
• DCC configuration for NI00IIIIRR030C213401 added
• DCC configuration for NI00IIIIRR030C20C605 added
• DCC configuration for NI00IIIIRR03094B2F01 added
• DCC configuration for NI00IIIIRR0301022E05 added
• DCC configuration for NI00IIIIRR0301022E01 added
• DCC configuration for NIMMIIIIRRFF0C206C02 added
• DCC configuration for NI00IIIIRR0301035602 added
• DCC configuration for NI00CS0000040C213402 added
• DCC configuration for NI00CS00000401022E05 added
• DCC configuration for NI00BC0000040F03F802 added
• DCC configuration for NI00BC0000040A4E2000 added
• DCC configuration for NI00BC000004095B1F01 added
• DCC configuration for NI00BC000004095B1F00 added
• DCC configuration for NI00BC0000040103B904 added
• DCC configuration for NI00BC0000040102F201 added
• DCC configuration for NI00BC00000401022C00 added
• DCC configuration for 0A4E2007 added
• DCC configuration for 0103B904 added
• SX4 Virgin PMs database updated, added RM-256, RM-497, RM-528V, RM-584, RM-586, RM-609, RM-612, RM-626, RM-638, RM-707, RM-712
• HWC/CCC Templates added for products RM-469, RM-540, RM-566, RM-528V, RM-596, RM-609, RM-614, RM-645
• Models.ini refreshed
• Skin Stack Updated
• Previous updates included
• Nokia Connectivity Cable Drivers updated to v7.1.42.0
• Box Firmware v01.73 Released
  
  BUG FIXES & IMPROVEMENTS
• Afterwards DCT4 Erase All chips, the Permanent Data aren't restored anymore
• Fixed DCT4 RPL Write problem when only DATA2 exists in RPL file
• Fixed problems with handling RAPIDO > v11.16.00 loaders over FBUS (FUR control Add Problem)
• Check flashing Bus for WD2 fixed
• Read UEM Imei for WD2 Fixed
• Read ASK for WD2 Fixed
• Write RPL for WD2 Fixed
• Fixed lots of Access Violations after closing up Nokia Tool
• Fixed bug with disappearing Tray icon after Minimize to Tray
• Bruteforce between NCK Fixed
• PM Write bugs fixed (Access Violation)
• Fixed bug with Broadcom Read Info
• Fixed spurious XGold2 product to be displayed in XGold1/DCT4 tab
• Fixed product mismatch on XG1/XG2 autodetection
• Fixed invalid Calculation of Mastercode
• 6230 Flashing Fixed (Given Image not matches with read UPP Id or Image problem). If problem still exists - select all flashing files _MANUALLY_ don't use INI based (because there exists two HW versions E and M - autoselection is HWID based and may fails anytime).
• OMAP Loaders Fixed
• Fixed some wrong FBUS implementation when Packet size mod 0x78 == 0

• MEP-04104-008 added
• MEP-42490-002 added
• Optimizations in TX2 data shifting
• Fixed problems with resuming device from Static (sleep) mode on some configurations
• Fixed some variants of JCOP31 handling
• Minor changes and bugfixes
  This is server-side update only, just do Box Maintenance and your box will be updated. Keep note that new major installer is still not ready yet (many internal changes related to engine, etc), however it should be ready within next week, so be prepared

• BB MEP-24660-003 added
• BB MEP-34870-001 added
• BB MEP-39371-001 added
• BB MEP-40488-002 added
• BB MEP-40954-001 added
• BB MEP-41468-001 added
• XGold1 ASC Flashing Booting issues solved
• Minor changes and bugfixes
• SuperDCT4 Free for EVERY Cyclone Box
  
  This is server-side update only.
  Upgrade your box using "Box Maintenance".

• Blackberry Module is standalone now, no need server connection
• MEP List combobox updated (237 meps), if not supported - type manually
• Added MEP-1 (SIM Card) to Requested MEP gro*****
• Added MEP-3 (Network Subset) to Requested MEP gro*****
• Added MEP-5 (Corporate) to Requested MEP gro*****
• Box firmware v01.63 is required
• After activating new firmware, box have internal 50 phones limit counter for security reasons. Each calculation drops counter. After reaching 0, Blackberry and XGold (use same slot) service is simply deactivated. To make it working again - just upgrade your box by Box Maintenance again - no re-activation fees, at all.
  1. Make sure you've installed Installer v1.15 installed first
  2. Upgrade your box firmware to v1.63
  

• Added READING DCT4+/XGold1 Encrypted Security Code from DCT4+ Based phone (previously shown as Crypted DCT4+) - of course WITHOUT data loss - seems 1st in the world
• Added RESET (to 12345) DCT4+/XGold1 Encrypted Security Code from DCT4+ Based phone - of course WITHOUT data loss - seems 1st in the world
• Added Reading Full RPL (NPC, CCC, HWC, SIMLOCK,SD,...) from Dead/Downgraded/Security Wrong BB5 Units - seems 1st in world. If phone doesn't power on (Stuck on Nokia logo, or completely dead), you can now dump full RPL file in order to Full Erase your phone and revive it. Software before dumping RPL in Recovery mode, will ask user of doing so. So in any case of reviving downgraded phone is:
  1. Create RPL from Dead Phone
  2. Full Erase
  3. Write any SW version
  4. Write previously backed-up RPL file
  5. Authorize with SuperDongle
  6. Write virgin PM
• Added (fixed) NCK Counter Reset for XGold2 based phones
• SecurityBlock is now backed-up before NCK Counters Reset, just in case
• XGold1 Dead units booting fixed
• Separate button for Receiving L7 Code for LBF added
• Fixed DCT4 Security Counter Attempts Reset for some DCT4 variants
• PMM Managment Tab added to BB5 Security Tab
• Auto-Imei RESTORE added. Used if you have corrupted your imei, but having valid NPC file. Will scan StoredFiles for CRT file matching with CMT Public ID and automatically write it.
• Added DCC camera Hardware Fault alert on DCC repair - some units is hardware fault and repair is not possible (DCC file not found)
• XGold1 PMM parsing fixed (While reading LBF, Simlock table not found for some operators/phones)
• XGold2 Flashing problems fixed (Invalid pointer)
• USB transactions module rewritten
• Full Erase button added for BB5 mobiles. No need to know FlashChip mapping and size - it's scanned automatically. It will erase CMT flash completely. Make sure RPL and PM is readed before erase!!!
• Added "Just NPC" option used with "Erase Certificates". Used to delete only NPC certificate (corrupt IMEI and switch phone-on to make necessary job ... with IMEI corrupted phone will switch on even without valid security area). You can use this function to dump PM from non-working phone. Don't forget to CREATE RPL FROM PHONE first! Else you will get corrupted IMEI.
• "Force Use Server" added for SX4 Authorization.
• Fixed AutoSelecting bug
• Fixed problem with parsing DCT4 variants when no DCT4 products installed
• Fixed problem with parsing BB5 variants when no BB5 products installed
• Index out of bound (0) fixed
• Plain RPL is checked now by default
• Removed "Bootloader upgrade problem" message, as caused too much confusion
• Security Problem #1 and #2 Fixed (anti-idiot-fix)
• Added additional Security Problem #5 message for Reinstall Drivers
• Minor changes and bugfixes

• New BB5 FBUS/USB Loaders v11.16.0 Introduced
• Unique Data Reading for RAPIDO based phones by USB added
• Unique Data Reading for RAPU based phones by USB added
• SL2 Unlock for Old Hash (E51..,..) and New Hash (6120c,6760) just by USB cable
• SL3 Unlock by reading LBF data for all SL3 RAPIDO/RAPU Phones
• Standalone Superdongle Auth - without SD key corruption
• SD Keys Repair
• Security Analyze
• RPL Backup
• All this using just usb cable...
• Our loaders automatically set phone to LocalMode after reading LogData - tested with N97, seems 1st in world
• RAPIDO phones before reading USB LogFile, needs to be manually set into FlashMode. Appropriate messagebox will be displayed with instructions (replug battery, cable, etc..). If your phone is RAPU or RAP4 based, you don't need to reject battery or do nothing - just click OK and it will switch to RAW mode directly.
• We also added support for FUR-like flashing for RAPIDO phones. That means it's possible to flash these phones FBUS-like (completely erased, etc - FBUS protocol emulation). However, because of many problems we've disabled it in current release. You can test it manually by placing "v11.16.0" RAPIDO loaders into \Loaders\BB5\FPIF32BIT.
  • Known problems with RAPIDO 11.16.0 loaders:
  • FBUS support is broken
  • Read Certificates via USB is broken (Control transactions support up to ~0x90 bytes of upcoming data)
  • Probably not working with Axxxx ROMS (E51)
  • Lot of other issues observed
• The FUR-like flashing (not ADL though) will be probably enabled in next version after closer investigation
• Fixed oclHashCat COD File bugs (occurs when last digit of imei is 0)
• Box Firmware v01.62 Released
• Minor changes and bugfixes

• New BB5 FBUS/USB Loaders v11.14.0 introduced
• Added 20 digits NCK recognition. Software will now give alert upon reading LBF data, when 20 digits NCK data will be found. This saves server time!
• The Profile Bits are also analyzed now during Reading LBF Data. If phone is i.e. from Telcel Mexico - LBF data will not be read (because it will not accepted calculated NCK code). This saves server time!
• BB5/XGold LBF is creating now additional "BCL" format file
• BB5/XGold LBF is creating now additional "SHA" format file
• BB5/XGold LBF is creating now additional oclHashCat ATI based 64-bit BAT File
• BB5/XGold LBF is creating now additional oclHashCat ATI based 32-bit BAT File
• BB5/XGold LBF is creating now additional oclHashCat NVIDIA based 64-bit BAT File
• BB5/XGold LBF is creating now additional oclHashCat NVIDIA based 32-bit BAT File
• SIMLOC30 RPL Write Fixed (C7-00,C2-01,...)
• The generated "BAT" file could be used by oclHashCat-lite. It's 3rd party software, available here: Download oclHashcat-lite-0.05.7z - hashcat, advanced password recovery . Unpack it somewhere, and place in same dir read "BAT" files. oclHashCat is 15% faster (can reach 6Billions hashes/sec on 2xhd5970) than log2cod, plus it supports latest ATI GPUS (HD6970,HD6990,HD6xxx). It supports calculation resume, etc.
• You don't need now log2cod to generate LBF Data. Just use generated BAT file for fast oclHashCat calculation. Generated COD file you can send directly to our server via "Send COD File to server" button to receive valid Level 7 code.
• Added oclHashCat COD file format support (now you can use oclHashCat generated COD/TXT files to submit to server and calculate Level 7 code)
• Added MxCrap COD file format support (now you can use oclHashCat generated COD/TXT files to submit to server and calculate Level 7 code)
• Added warning message when TX2 transmission error occurs during 2ND Loader Initialization
• Upgraded RAPIDO Custom loader to v1.05. Fixed Reading Unique Data issues on old Public Rom (A8C1D671) based phones (N95,N78,...).
• BlackBerry MEP-4 calculation added
• Merged previous updates (RAPIDO/RAPU/RAP4 all latest hashes support for reading LBF data, etc...)
• Fixed Security Code Reset Issues on DCT4/BB5 Platform
• Firmware v1.61 Released
• Minor changes and bugfixes

• CYCLONE BOX ADDED ALL LATEST BLACKBERRY MEPS (including new security 2011) (12 New Security Meps Added)
  MEP-06041-011
  MEP-09625-002
  MEP-40954-001
  MEP-24667-003
  MEP-08209-004
  MEP-40488-002
  MEP-09292-008
  MEP-39371-001
  MEP-09292-006
  MEP-34723-001
  MEP-34870-001
  MEP-24660-003
  

• Blackberry Module added, support all latest 210 MEPs. Unlock is FREE, and uses server to calculate Unlock Codes
• If Logger fails somehow, you might still use manual mode (if you know IMEI and MEP)
• All DCT4 RPLs are FREE now (Included ASICs: 2,5,6,7,11)
• Skin changed back to white one (too many users complained)
• Improved mode transition between Main/Boot (timeout increased)
• Fixed problem when upon adding "New Path" in "Paths" module Root directory was empty
• CBUS stack improved, if box is disconnected during work, it tries to connect it again instead of "CBUS ERROR"
• Minor changes and bugfixes
  
  How it works? 1. Run Blackberry Module 2. Install drivers (skip this if done already) 3. Click "Read Phone" 4. Connect phone to computer 5. Unlock using calculated codes

• Added support for NEW Nokia BB5 FBUS CMT Loaders (flashing new phones E52 ST Chip, X3, X6, 5530, etc, etc), supported RAPU,RAPIDO,RAPv4 phones,etc. You can flash your phone using New Protocol, but also manage Reading/Writing Certificates,etc.
• Added support for BB5 FBUS New Protocol APE Loaders
• Added support for Unlock / Relock / Autolock DCT4 RSA Based phones (1661, 5030, 1202, and generally ALL ASIC 11 phones), without patch. Solution is standalone and to unlock one phone takes no longer than 2 seconds.
• Added CS Repair due to Bad Simlock in ASIC11 phones (no patch)
• Latest Nokia Loaders 2010 Introduced (including upgraded RAPv3 old prot algo 9.50)
• Added SD Repair, RPL Calc, etc for RAP3v2 phones (hash E9EFF4BFAA5393217CA6B17755FC3E14)
• Added SIMLOCK BACKUP for SL3 phones (can be restored even after fullerase)
• Added support for NCK Reading, SD Extracting, and more accurate Securtity Analysis for v30.xx phones (N96, 5800, etc) - so called by "mx" team "sl3" but in fact is simple sl2), previous versions gave msg about "Decryption fails"
• Added COM Emulator - now Cyclone Box can work as UNI BOX with UFS Pinout !
• Added one-click analyze / repair of Dynamic Camera Configuration (blank screen, "camera not re