 |
|
|
iPHONE REMOTE UNLOCK - SIMFREE UNLOCKING SOFTWARE (VERSION 1.8) | |
|
Your opinion matters to us, so speak up and be heard!
|
|
Opinions, Corrections, Price errors, even technical problem on this store, are welcome!
Thank you again for your feedback, it improves our performance for ALL of You.
Please note: we may not be able to reply directly to suggestions.
|
|
|
|
|
History of changes
October 29th, 2007
With the release of the new jailbreak/activation by the community development teams there is no longer a need to downgrade to 1.0.2. SimFree 1.7 is specifically tailored to be run on 1.1.1 phones with no need to downgrade. The brilliant work by the teams combined with SimFree 1.7 means that it is now possible to get a brand new 1.1.1 phone and have it fully up and running in under 10 minutes. We recommend that all our previously unlocked users upgrade to 1.1.1 . Please note that if you have already unlocked your phone once using any previous version of SimFree there is no need to unlock it again.
Download SimFree v1.7
Please follow the simple step by step instructions outlined below to get Simfee 1.7 onto a freshly jailbroken phone.
- On the Activation Screen, slide to the Emergency Screen.
- Type *#307# and hit Call, the phone will start ringing and display 1 Calling.
- Delete all the numbers from the top right of the screen and Call the number 0.
- Press Answer, Hold and then Decline.
- Go to Contacts and create a contact. In the URL field type prefs://1f and save it. Then add another URL and type jailbreakme.com and save it.
- Click on the prefs://1f and you can select your WiFi network. Exit by pressing home and then Dial and Call the number 0 from the emergency screen.
- Select the second URL called jailbreakme.com of the contact you created and and follow the Install AppSnapp. Wait for it to finish and reboot the phone when its done.
- Now AppTapp is on your Home Screen so you can install SimFree v1.7 directly on the phone.
- In Sources press Edit, Add, and type in http://tinyurl.com/2qxpe6 . Accept the AppTapp installer message and it will show iPhoneSimFree on your Install list.
- After that you must install from the System tab the BSD Subsystem and then SimFree v1.7 from the iPhoneSimFree tab.
- You should now Go to the phone Settings application and in General - AutoLock, select Never you can now run SimFree v1.7. Its that easy!
October 10th, 2007
Worlds First Unlock for iPhone 1.1.1 / 04.01.13_G Firmware
Our sincere congratulations, to the iPhone/ iTouch Dev Team for their brilliant work in finding an ingenious way to jailbreak the 1.1.1 system. This exciting news means we are now able to gladly welcome all SIMFREE unlocked phone owners to UPGRADE to 1.1.1 if they so wish
Further to this, we are very proud to announce, (after some very difficult and lengthy hardware hackery), we were able to retrieve the necessary info to create the world first 1.1.1 unlock solution. We have now tested SimFree v1.6 with phones that have the new Baseband version 04.01.13_G with full success. This now means that SimFree v1.6 release, is now capable of completely restoring/repairing software unlocked "bricked" iPhone. Those of you wishing to repair your phone, please read the following steps.
Steps for "un-bricking" your anySim or iUnock iPhones:
- Follow the iPhone/iTouch dev team steps to bring your phone back to 1.0.2 system (your baseband firmware will still be the newer 04.01.13_G)
- Register your true IMEI (found engraved on the back of your phone) with our servers through one of our trusted resellers.
- Power down your phone and REMOVE your sim
- Power up with the sim removed and Install SimFree.app 1.6 (simplest method is through apptapp installer)
- Follow this tutorial to execute the Simfree. app.
Here is the direct link to SimFree v1.6: Download SimFree v1.6
Why use iPhoneSimFree, Facts about unlocking with SimFree
- iPhoneSimFree was the first to release a Software Unlock for the iPhone.
- iPhoneSimFree Unlock works on ALL versions of iPhone (1.0.0, 1.0.1, 1.0.2, 1.1.1)
- iPhoneSimFree Unlock works on ALL versions of Modem Firmware ( even the latest 04.01.13_G )
- iPhoneSimFree Unlocked phones can be updated from any version to 1.1.1 safely without bricking your radio and GSM functions (unlike other unlock methods)
- iPhoneSimFree does not patch your devices firmware ( unlike other unlocking methods )
- iPhoneSimFree can FIX all phones that anySim and iUnlock bricked with the 1.1.1 update
- iPhoneSimFree Unlock is restore and update resistant up to and including 1.1.1
September 28th, 2007
Q & A For iPhoneSimFree Users and 1.1.1 iPhone Update
Q. Why do you say it is unlocked if you can't activate a non AT&T sim?
A. There is a difference between unlocking and activation. Unlocking is related to GSM standards and allowing a sim to be used on different carriers, and activation is something made up by apple to further restrict their users. After upgrading to 1.1.1 the radio of the phone is still unlocked, meaning it can still connect to other carriers, but apple requires the phone be activated to do so.
Q. How do you know it is unlocked if you can't activate?
A. There are several ways to know this. Firstly, the phone does not report "Incorrect SIM". Secondly the IMEI is correct. Thirdly if you bring up the field test, you can see the provider is not AT&T. And finally (and coolest of all), there are ways to actually call out and receive calls from the emergency call screen. If you can get the baseband to crash (we do it by calling some emergency numbers with no sim in place) and then insert the non AT&T sim, it can pick up a signal and calls (non-emergency) can be placed and received from the emergency call screen on the non AT&T carrier.
Q. Why does all this matter, if I can't yet use a non AT&T sim?
A. A few reasons. Firstly the phone can still be used by AT&T users after upgrade. Secondly, if apple has patched the methods used to perform the unlock, as long as an activation method is discovered, the phone will work perfectly on other carriers. With other unlocking solutions, if you were to upgrade the phone it would currently be a brick, and if apple has patched the methods to perform the unlock, it would also stay a brick forever..
|
|
Buy with confidence.
Our unlocking products and services have been positively reviewed by PC Magazine, Fox News, Howard Forums and many other websites and online forums.
Description |
With the release of the new jailbreak/activation by the community development teams there is no longer a need to downgrade to 1.0.2. SimFree 1.7 is specifically tailored to be run on 1.1.1 phones with no need to downgrade. The brilliant work by the teams combined with SimFree 1.7 means that it is now possible to get a brand new 1.1.1 phone and have it fully up and running in under 10 minutes.
Our sincere congratulations, to the iPhone/ iTouch Dev Team for their brilliant work in finding an ingenious way to jailbreak the 1.1.1 system. This exciting news means we are now able to gladly welcome all SIMFREE unlocked phone owners to UPGRADE to 1.1.1 if they so wish.
Further to this, we are very proud to announce, (after some very difficult and lengthy hardware hackery), we were able to retrieve the necessary info to create the world first 1.1.1 unlock solution. We have now tested SimFree v1.6 with phones that have the new Baseband version 04.01.13_G with full success. This now means that SimFree v1.6 release, is now capable of completely restoring/repairing software unlocked "bricked" iPhone.
|
Unlock Service Details |
- Type of Unlock: Apple iPhone remote sim unlock.
Your phone does not have to be shipped to us.
- Turnaround: Usually within 10-30 minutes.
- Ease of Use: Easy, software installation will be required.
- Cable Required: No.
- Computer Required: No.
- Internet Required: Yes (Wi-Fi connection via phone)
Important!!!
IMEI number can be found engraved on the back of the phone. Please do not use IMEI reported by the phone's software.
We will not be giving refunds for wrongly submitted IMEI number.
|
Why use iPhoneSimFree, Facts about unlocking with SimFree |
- iPhoneSimFree was the first to release a Software Unlock for the iPhone.
- iPhoneSimFree Unlock works on ALL versions of iPhone (1.0.0, 1.0.1, 1.0.2, 1.1.1)
- iPhoneSimFree Unlock works on ALL versions of Modem Firmware ( even the latest 04.01.13_G )
- iPhoneSimFree Unlocked phones can be updated from any version to 1.1.1 safely without bricking your radio and GSM functions (unlike other unlock methods)
- iPhoneSimFree does not patch your devices firmware ( unlike other unlocking methods )
- iPhoneSimFree can FIX all phones that anySim and iUnlock bricked with the 1.1.1 update
- iPhoneSimFree Unlock is restore and update resistant up to and including 1.1.1
|
How safe is it and is it guaranteed to work? |
Important!!!
iPhoneSimFree unlocking software supports firmware versions of up to 1.1.1. If you bought your phone with version 1.1.1 and later upgraded to version 1.1.2 you CAN use this software to unlock your cell phone (instructions will be provided). However if your handset was bought with 1.1.2 due to a new bootloader it is not currently supported by iPhoneSimFree software.
After unlocking your handset using iPhone SimFree application DO NOT upgrade your firmware to anything above 1.1.1 without consulting us.
You can use X-sim iphone unlock for iphone Ver. 1.1.2
This is a proven and fully working method of unlocking iphone.
The unlocking software is developed by iPhoneSimFree. The software is very easy to operate. Demo video can be found here. You can also see the review and video of the unlocking process on Engadget, CNN and Gizmoto.
The software works on all current firmware versions up to 1.1.1. Read here on how to check firmware of your iphone.
|
|
|
|
|
|
|
Customers who bought this product also bought :
|
|
|
|
|
|
|
|
