Jtag service cables for GPG EMMC Box | Service cable for GPG Jtag GPGjtag box | Testpoint cables for JTAG Pro box JTAGpro

Jpin Jtag was specially designed by Moorc for JTAG boxes such as RIFF, Easy JTAG, Medusa, etc. It helps connect your JTAG box to Samsung/LG/Nokia phone without soldering using jpin flex cables.

Jpin Jtag was specially designed by Moorc for JTAG boxes such as RIFF, Easy JTAG, Medusa, etc. It helps connect your JTAG box to Samsung/LG/Nokia phone without soldering using jpin flex cables.

Jpin Jtag was specially designed by Moorc for JTAG boxes such as RIFF, Easy JTAG, Medusa, etc. It helps connect your JTAG box to Samsung, LG, Nokia, Asus phones without soldering using jpin flex cables.

Jpin Jtags were specially designed by Moorc for JTAG boxes such as RIFF, Easy JTAG, Medusa, etc. It helps connect your JTAG box to Samsung, ASUS, LG phone without soldering using jpin flex cables.

Set of JTAG Molex headers provides additional connection for supported phones via JTAG PCB. You will need this header if you want to install JTAG PCB to your phone.

Cable set compatible with ZTE S131, ZTE C370, LG3540, LG6100, LG3100, Samsung SCH-B309, Micromax C112, HUAWEI C2829 cdma mobile phones to perform easy testpoint jtag on RIFF box, Z3X easy jtag box (Z3X pro), ORT, GPG EMMC box (GPG pro) and other JTAG tools

FTDI adapter RJ45 to USB with COM emulation allows you to connect infinity, unibox RJ45 cables directly to USB with COM port emulation

ICFRIEND NB EMMC 13 in 1 adapter is compatible with all most known EMMC boxes: RIFF box, RIFF 2, ATF, Z3X Easy Jtag, Z3X Easy Jtag Plus, Medusa Pro, UFi

JTAG cable for easy connecting JTAG box to JIGs. Compatible with RIFF box, Omnia Repair Tool, GPG JTAG Pro, Z3X Easy Jtag, etc

This special BGA 221 Socket can be used directly with MOORC E-Mate Box, Riff Box, GPGEmmc Box, and also with ATF, Z3X Easy Jtag too via E-Mate box

E-MATE E-Socket (6 in 1) is a flash adapter supporting BGA186, BGA153, BGA221, BGA169E, BGA162 without soldering. High-speed programming with Riff JTAG, Z3x Easy JTAG, Z3x pro, ATF, GPG EMMC Boxes.

E-MATE E-Socket (5 in 1) is a flash adapter. No soldering required. BGA169E and BGA162 support. High-speed programming with Riff JTAG, Z3x EasyJTAG, ATF, GPG EMMC Boxes.

MOORC E-Mate Pro EMMC Tool allows you to read and write directly from/to eMMC chips. It is compatible with a number of EMMC tools: Riff v2, Z3x easy JTAG, Medusa, GPG EMMC box

E-mate Pro EMMC tool v2 is an upgrade for previous v1. It is compatible with all most known EMMC boxes: RIFF box, RIFF2, ATF, Z3X Easy Jtag Plus, Medusa Pro, UFi box

E-mate X EMMC 13 in 1 adapter is compatible with all most known EMMC boxes: RIFF box, RIFF 2, ATF, Z3X Easy Jtag, Z3X Easy Jtag Plus, Medusa Pro, UFi

eMMC JTAG-ISP set of adapters allows direct programming (BGA162 / 186, BGA221, BGA153 / 169) with your ATF, ATF Lightning, ATF Nitro, Octoplus, Medusa, Riff, GPGeMMC, Z3x Easy JTAG, ORT boxes

The Probe Cable for Riff Box has dual purpose: probe needle is used to find JTAG signals on unknown phone boards, the second purpose is to power the target board without an external power supply. JTAG cable has labeled wires for easily connecting JTAG box...

JTAG cable compatible with labeled wires for easy connecting JTAG box to PCB. Compatible with RIFF box, Omnia Repair Tool, GPG JTAG Pro, Z3X Easy Jtag, etc

Cable compatible with ZTE S131 mobile phone to perform easy testpoint jtag on RIFF box, Z3X easy jtag box (Z3X pro), ORT, GPG EMMC box (GPG pro) and other JTAG tools