LG jtag adapter cable | LG jig | Buy LG jtag for Medusa, Easy jtag, ORT, Riff box | Moorc jpin jtag flex cables and adapters

Jpin Jtag was specially designed by Moorc for JTAG boxes such as RIFF, Easy JTAG, Medusa, etc. It helps connect your JTAG box to Samsung/LG/Nokia phone without soldering using jpin flex cables.

Jpin Jtag was specially designed by Moorc for JTAG boxes such as RIFF, Easy JTAG, Medusa, etc. It helps connect your JTAG box to Samsung/LG/Nokia phone without soldering using jpin flex cables.

Jpin Jtag was specially designed by Moorc for JTAG boxes such as RIFF, Easy JTAG, Medusa, etc. It helps connect your JTAG box to Samsung, LG, Nokia, Asus phones without soldering using jpin flex cables.

Jpin Jtags were specially designed by Moorc for JTAG boxes such as RIFF, Easy JTAG, Medusa, etc. It helps connect your JTAG box to Samsung, ASUS, LG phone without soldering using jpin flex cables.

Set of JTAG Molex headers provides additional connection for supported phones via JTAG PCB. You will need this header if you want to install JTAG PCB to your phone.

This collection of Jtag jigs helps make test point work easier. Compatible with a number of Samsung, HTC and LG models
These special Jtag adapters are compatible with RIFF Box, Jtag Pro, JRT, ORT users with mounted pins to allow repair boot in HTC and...

EMMC adapter for Easy JTAG Box (Z3x-Pro) allows you to perform easy repair of phones with disabled access to bootloader via DCC (GT-i9300 / N7100 / N719 / N7102) or phones with damaged JTAG pinouts (access to ROM2 by EMMC).

30-in-1 GPG Easy JIGs are special PCBs to perfectly fit LG, Nokia, Samsung and Huawei mobile devices. These PCBs have appropriately soldered pins so you can start working right away. With 30-in-1 GPG Easy JIGs you'll be able to repair dead boot of the...

33-in-1 GPG Easy JIGs are special PCBs to perfectly fit LG, Nokia, Samsung and Huawei mobile devices. These PCBs have appropriately soldered pins so you can start working right away. With 33-in-1 GPG Easy JIGs you'll be able to repair dead boot of the...

ICFRIEND NB EMMC 13 in 1 adapter is compatible with all most known EMMC boxes: RIFF box, RIFF 2, ATF, Z3X Easy Jtag, Z3X Easy Jtag Plus, Medusa Pro, UFi

JTAG cable for easy connecting JTAG box to JIGs. Compatible with RIFF box, Omnia Repair Tool, GPG JTAG Pro, Z3X Easy Jtag, etc

edusa Pro 20 Pin adapter is intended to be used with Medusa Pro Box. Its pins are marked in accordance with Medusa Pro Box pinout.

This special BGA 221 Socket can be used directly with MOORC E-Mate Box, Riff Box, GPGEmmc Box, and also with ATF, Z3X Easy Jtag too via E-Mate box

E-MATE E-Socket (6 in 1) is a flash adapter supporting BGA186, BGA153, BGA221, BGA169E, BGA162 without soldering. High-speed programming with Riff JTAG, Z3x Easy JTAG, Z3x pro, ATF, GPG EMMC Boxes.

E-MATE E-Socket (5 in 1) is a flash adapter. No soldering required. BGA169E and BGA162 support. High-speed programming with Riff JTAG, Z3x EasyJTAG, ATF, GPG EMMC Boxes.

MOORC E-Mate Pro EMMC Tool allows you to read and write directly from/to eMMC chips. It is compatible with a number of EMMC tools: Riff v2, Z3x easy JTAG, Medusa, GPG EMMC box

E-mate Pro EMMC tool v2 is an upgrade for previous v1. It is compatible with all most known EMMC boxes: RIFF box, RIFF2, ATF, Z3X Easy Jtag Plus, Medusa Pro, UFi box

E-mate X EMMC 13 in 1 adapter is compatible with all most known EMMC boxes: RIFF box, RIFF 2, ATF, Z3X Easy Jtag, Z3X Easy Jtag Plus, Medusa Pro, UFi

MOORC JPIN JTAG Molex adapter allows you to connect JTAG adapters made by MOORC using flex cable to Medusa or Octoplus boxes.

eMMC JTAG-ISP set of adapters allows direct programming (BGA162 / 186, BGA221, BGA153 / 169) with your ATF, ATF Lightning, ATF Nitro, Octoplus, Medusa, Riff, GPGeMMC, Z3x Easy JTAG, ORT boxes

The Probe Cable for Riff Box has dual purpose: probe needle is used to find JTAG signals on unknown phone boards, the second purpose is to power the target board without an external power supply. JTAG cable has labeled wires for easily connecting JTAG box...

RC2000 adapter for RIFF v2 allows you to connect in ISP mode (directly onto your phone without removing the EMMC) or Direct (by removing the BGA soldering and the corresponding memory fields or using adapter).

Adapter to connect RIFF box 2 to E-mate pro tool

This special BGA UFS-95 socket can be used directly with Z3X Easy jtag box to connect UFS memory