|
RIFF JTAG BOX (REPAIR / UNBRICK / REVIVE HTC, SAMSUNG, LG, ZTE, HUAWEI)
The outstanding feature of this box is its ability to unbrick and repair completely dead GSM and CDMA cell phones, GPS devices, tablets, modems, satellite receivers, network routers. It supports hundreds of devices such as HTC Butterfly, Wildfire, One, Mozart, Legend, Desire, 500, 506e,...
|
|
|
Z3X EASY-JTAG BOX (Z3X PRO) [UNBRICK REPAIR SAMSUNG LG MOTOROLA HUAWEI NOKIA]
EasyJTAG Box is a professional JTAG programmer allowing you to work with devices (single or united into common chain) through JTAG interface. The main purpose of Easy-JTAG Box is repairing dead boots of the devices (cell phones, PDAs, modems, etc.). Added Nokia Lumia 520, 610, 620,...
|
|
|
EMMC 3 IN 1 ADAPTER FOR EASY JTAG BOX (Z3X PRO)
EMMC adapter for Easy JTAG Box (Z3x-Pro) allows you to perform easy repair of phones with disabled access to bootloader via DCC (GT-i9300 / N7100 / N719 / N7102) or phones with damaged JTAG pinouts (access to ROM2 by EMMC).
|
|
|
OCTOPLUS BOX [ IMEI REPAIR, UNLOCK, FLASH, FRP RESET, ROOT SAMSUNG, LG ]
Groundbreaking all in one mobile phone servicing solution that combines Octopus and medusa JTAG interfaces. Supports 1670 Samsung, 1780 LG models & over 1030 devices by JTAG
The most robust & frequently updated tool for Samsung, LG Recently added Galaxy ON5, S7, S6 Edge, Note5,...
|
|
|
RIFF BOX VER. 2 REPAIR TOOL (WITH SUPPORT FOR EMMC, JTAG, i2C, SPi, i2C)
There is no other device with so many complex functions supported.
Riff Box ver.2 suits most of regular user needs, although it is aimed at advanced developers who need to debug their own embedded code or reverse someone else's.
Unique scripting support, GDB Server for...
|
|
|
|
 |
|
Functions of JTAG - ISP adapter
- JTAG Via Molex
You can use the JTAG function of your ATF, Medusa, Riff, EasyJTAG, GPGemmc Box and this Adapter to unlock some phones via easier JTAG molex port. Connect an FPC ribbon to your adapter, then connect the molex connector to the flat ribbon cable and ultimately to the board of the phone via molex port.
JPIN connector set if required can be purchased from this link
- EMMC Direct
You can use included BGA PCBs to direct Read / Write Emmc using this adapter with ATF/Easy jtag/GPG EMMC/Riff software. Supported BGA sockets: BGA162 / 186, BGA221, BGA153 / 169
- MMC Card
You can use this Adapter to brute force MMC Cards and create special MMC Cards
- JTAG / ISP / EMMC Direct Soldering
You can use this Adapter and solder wires directly to phone PCB for JTAG Repair as well as ISP and EMMC Direct Repair.
|
JTAG - ISP Compatibility
|
Package content
- 1 x BGA 169-153 PCB
- 1 x BGA 162-186 PCB
- 1 x BGA 221 PCB
- 1 x ATF / Medusa / Octoplus cable
- 1 x JTAG ISP Adapter
|
|
|
|
|