Adapters for Naviplus pro 300s | NAND non removal adapter | no soldering adaptador | icloud unlock |SN change, iPad 2 3 4 Air iPhone 6 7 | chip programmer
|
 |
|
|
|
|
|
 |
|
 |
APPLE iPAD 3 ADAPTER FOR NAVIPLUS PRO 3000S CHIP PROGRAMMER | |
|
|
RIFF JTAG BOX (REPAIR / UNBRICK / REVIVE HTC, SAMSUNG, LG, ZTE, HUAWEI)
The outstanding feature of this box is its ability to unbrick and repair completely dead GSM and CDMA cell phones, GPS devices, tablets, modems, satellite receivers, network routers. It supports hundreds of devices such as HTC Butterfly, Wildfire, One, Mozart, Legend, Desire, 500, 506e,...
|
|
|
Z3X EASY-JTAG BOX (Z3X PRO) [UNBRICK REPAIR SAMSUNG LG MOTOROLA HUAWEI NOKIA]
EasyJTAG Box is a professional JTAG programmer allowing you to work with devices (single or united into common chain) through JTAG interface. The main purpose of Easy-JTAG Box is repairing dead boots of the devices (cell phones, PDAs, modems, etc.). Added Nokia Lumia 520, 610, 620,...
|
|
|
OMNIA REPAIR TOOL (REPAIR BOOT VIA JTAG ON SAMSUNG ZTE LG MOTOROLA)
Repair your Samsung and other mobile phones having one of the following problems:
Completely dead
Only Red (led) Power on button lighting but phone does not power on
Detected as MONOHANS device on PC
Hang on start-up logo
Hang on Windows Mobile logo
Not...
|
|
|
EMMC 3 IN 1 ADAPTER FOR EASY JTAG BOX (Z3X PRO)
EMMC adapter for Easy JTAG Box (Z3x-Pro) allows you to perform easy repair of phones with disabled access to bootloader via DCC (GT-i9300 / N7100 / N719 / N7102) or phones with damaged JTAG pinouts (access to ROM2 by EMMC).
|
|
|
OCTOPLUS BOX [ IMEI REPAIR, UNLOCK, FLASH, FRP RESET, ROOT SAMSUNG, LG ]
Groundbreaking all in one mobile phone servicing solution that combines Octopus and medusa JTAG interfaces. Supports 1670 Samsung, 1780 LG models & over 1030 devices by JTAG
The most robust & frequently updated tool for Samsung, LG Recently added Galaxy ON5, S7, S6 Edge, Note5,...
|
|
|
|
 |
Description
This adapter works with Apple iPads without removing NAND chip. iPad 3 (A1416, only one NAND)
Note:
Plastic shield has to be removed from the corresponding pad area on logic board.
Module plug of Naviplus PRO 3000S should connect directly pin to pin, otherwise it won’t work
Please be careful, there is no auto detect function in HDD Check
|
Functions
- Read & Write NAND Flash on iPad 3
- Change Serial Number (SN) on iPad 3
- Change Model on iPad 3
- Change Area on iPad 3
- Change Color on iPad 3
- Repair errors: 9, 40, 2009, 4013, 4014, caused by the failures of the hard disk red screen, blue screen, boot screen failure.
|
Features
- No computer is required, plug and play
- You may use all functions of Naviplus PRO 3000S
- Reliable contact – logic board to module
- 0.1 inch 28-pins dual-in-line plug
- Independent module for each model
- Guarantied fix of any error caused by NAND data corruption
|
Package content
|
|
|
|
|
|
|
|
 |
|
|
|
|