Unlock Netgear Nighthawk M1 MR1100 :: DC-unlocker tutorial

• You Netgear Nighthawk device is connected and turned on with no sim inside
• Your mobile device is enabled in Network Connections
• Device is not connected to the internet
• All necessary drivers are installed
• Router software (if there is one installed) is not running in the background, it must be completely closed

1. Connect device to PC via male to male USB cable.
   
   
2. Open Device manager on your PC and make sure device appears there under Network Adapters or Modems otherwise device will not be detected.
   
   If you see your device with an exclamation mark - it is connected but drivers are not installed or have a conflict. If you don't see your mobile device at all it means it is not connected.
   
   
   
   
   
3. Enter login details [1] that you received from us.
   
   
4. Click on "Check login" button [2] to verify the number of credits [3]
   
   
   
   
   If you are getting error 62 or other connection error make sure that firewall and antivirus on your PC is disabled. Also change adapter binding settings.
   
   
   In case of error "Network adapters has same IP subnet! Please change network card or router IP address to different subnet."
   Go to Control Panel > Network Connections > Right click on your modem connection > Properties > Internet protocol (TCP/IP v4) > Properties
   
   and set these values
   IP: 192.168.X.1
   (where X is a number different from active devices's IP address) Subnet mask: 255.255.255.0
5. Detect device by selecting SierraWireless/NETGEAR [4] and Autodetect [5] and click "Search" [6]
   
   
6. After the modem has been successfully detected you can proceed to unlocking [7]
   
   
7. Set correct APN for different operator's card (if you do not have APN or don't know it, call operator of sim card that you try to use device with). Now you can use it with any SIM card
   
   

Sim lock, Network lock unlocking. General guidelines

• You device is connected and turned on with no sim inside
• Your mobile device is enabled in Network Connections
• Device is not connected to the internet
• All necessary drivers are installed
• Connection software / WebUI / Dashboard (if there is one) is installed but not running

1. Open device manager on your PC and make sure device appears there under Network adapters or Modems and Ports sections. If you see your device with an exclamation mark - it is connected but drivers are not installed. If you don't see your mobile device at all it means it is not connected.
   You will only be able to unlock if the device is visible and installed in Device manager.
   
   
   
   
   
   
2. Enter login details [1] that you received from us.
3. Click on "Check login" button [2] to verify successful connection between your PC and our server and to check the number of credits available [3]
   
   If you are getting error 62 or other connection error make sure that firewall and antivirus on your PC is disabled. Also change adapter binding settings.
   
   
   In case of error "Network adapters has same IP subnet! Please change network card or router IP address to different subnet."
   Go to Control Panel > Network Connections > Right click on your modem connection > Properties > Internet protocol (TCP/IP v4) > Properties
   
   and set these values
   IP: 192.168.X.1
   (where X is a number different from active devices's IP address) Subnet mask: 255.255.255.0
   
   
   
   
   
4. Follow instructions on the output screen and connect your modem to the PC
5. Select phone [4] and "Auto detect" for model [5] and click "Search" [6]. This will verify that you have connection between software and your router
   If your device is not detected see adapter binding settings
   
   
6. After the modem has been successfully detected you can proceed to unlocking [7]