 |
|
|
MOORC E-MATE BOX PRO EMMC TOOL 2017 | |
|
![Z3X EASY-JTAG BOX (Z3X PRO) [UNBRICK REPAIR SAMSUNG LG MOTOROLA HUAWEI NOKIA]](https://www.cellcorner.com/xshp/storedimages/thumbs/t_31074_01.jpg "Z3X EASY-JTAG BOX (Z3X PRO)...")
|
Z3X EASY-JTAG BOX (Z3X PRO) [UNBRICK REPAIR SAMSUNG LG MOTOROLA HUAWEI NOKIA]
EasyJTAG Box is a professional JTAG programmer allowing you to work with devices (single or united into common chain) through JTAG interface. The main purpose of Easy-JTAG Box is repairing dead boots of the devices (cell phones, PDAs, modems, etc.).
Added Nokia Lumia 520, 610, 620,...
|
|
|
EMMC 3 IN 1 ADAPTER FOR EASY JTAG BOX (Z3X PRO)
|
EMMC adapter for Easy JTAG Box (Z3x-Pro) allows you to perform easy repair of phones with disabled access to bootloader via DCC (GT-i9300 / N7100 / N719 / N7102) or phones with damaged JTAG pinouts (access to ROM2 by EMMC).
|
|
![OCTOPLUS BOX [ IMEI REPAIR, UNLOCK, FLASH, FRP RESET, ROOT SAMSUNG, LG ]](https://www.cellcorner.com/xshp/storedimages/thumbs/t_31120.jpg "OCTOPLUS BOX [ IMEI REPAIR,...")
|
OCTOPLUS BOX [ IMEI REPAIR, UNLOCK, FLASH, FRP RESET, ROOT SAMSUNG, LG ]
Groundbreaking all in one mobile phone servicing solution that combines Octopus and medusa JTAG interfaces. Supports 1670 Samsung, 1780 LG models & over 1030 devices by JTAG
The most robust & frequently updated tool for Samsung, LG
Recently added Galaxy ON5, S7, S6 Edge, Note5,...
|
|
|
RIFF BOX VER. 2 REPAIR TOOL (WITH SUPPORT FOR EMMC, JTAG, i2C, SPi, i2C)
There is no other device with so many complex functions supported.
Riff Box ver.2 suits most of regular user needs, although it is aimed at advanced developers who need to debug their own embedded code or reverse someone else's.
Unique scripting support, GDB Server for...
|
|
|
MEDUSA PRO BOX /W EMMC SUPPORT & JTAG PIN FINDER
|
Medusa PRO Box is a professional phone flashing and mobile unlocking tool that lets you work with a wide range of Samsung, Huawei, LG, Motorola, Siemens, Sony Ericsson, Vodafone, ZTE and other mobile devices through JTAG, USB and MMC interfaces.
|
|
|
RC2000 ADAPTER EMMC - JTAG FOR RIFF BOX 2
|
RC2000 adapter for RIFF v2 allows you to connect in ISP mode (directly onto your phone without removing the EMMC) or Direct (by removing the BGA soldering and the corresponding memory fields or using adapter).
|
|
|
MEDUSA PRO JIG 20 PIN SOLDERING ADAPTER
|
edusa Pro 20 Pin adapter is intended to be used with Medusa Pro Box. Its pins are marked in accordance with Medusa Pro Box pinout.
|
|
|
ATF GOLD BOX - ADVANCED TURBO FLASHER
|
Advance Turbo Flasher (ATF Box) is a highly professional and time-saving solution for Nokia cell phone servicing.
|
|
![Z3X EASY JTAG PLUS [ FULL VERSION ]](https://www.cellcorner.com/xshp/storedimages/thumbs/t_32538.jpg "Z3X EASY JTAG PLUS [ FULL...")
|
Z3X EASY JTAG PLUS [ FULL VERSION ]
This Upgraded Easy Jtag PLUS features ultra fast data transfer, supports UFS, eMMC, MCP, NAND, Apple PPN NAND, JTAG Connection and SPI Chips. Lightweight software is made especially for mobile phones repair, eMMC memory chips replacement and user data recovery.
Full version...
|
|
|
|
|
Features of E-MATE Pro
- Intelligent: just read it, operate the programming, reading the chip ROM1 USERDATA with just a key. Support the making of SDC repair card.
- Speed: eMMC which read-write speed could be 33MB per second. Its speed is related to eMMC version. The whole database programming of I9300 just need 10 minutes to complete.
- Simple: there is no need to choose the font type. The interface is simple and easy to use which support all the chip package of emmc
- Reliable: special machine design of the third generation eMMC, special power supply, independent overcurrent protection.
- E-mate High speed programming for EMMC 4G-64G
- EMMC version 4.41 READ:25.3MB/S WRITE:19.6MB/S
- EMMC version 4.5 READ:25.9MB/S WRITE:30.2MB/S
- Support Qualcomm phone emmc chip4GB 8GB 16GB 32GB 64GB 128GB read and write
- Support EMMC chip rom1 (user=data=rom1) area read and write
- Qualcomm only need to write rom1
- Samsung CPU phone need to write the boot, please use EasyJtag or ATF box
|
E-MATE Pro Compatibility
|
Advantages of E-MATE Pro
- No soldering required
- Can be easily disassembled
- You can change pins at any time
- Works with all boxes (for example: Z3X EasyJTAG, ATF, GPG EMMC Box and many others...)
- Works very well with Easy JTAG Box. Combined together those two devices are really a time saver, exceptionally powerful, efficient and easy to operate.
- Intelligent: just read the data, operate the programming. Ability to read the chip ROM1 USERDATA with just a key. Support of making the SDC repair card.
- Simple: there is no need to choose the font type. The interface is simple and easy to use, which is supports all the chip package of EMMC.
- Reliable: special device design of the third generation EMMC, special power supply, independent overcurrent protection.
|
Package content
- 1 x 8-in-1 U-Socket Adapter
- 1 x 6-in-1 EMMC Socket Adapter
- 1 x RJ45 Two-way Cable
- 4 x Flash Memory Adapter
- 4 x Bolts
- 4 x Struts
|
|
|
|
|
|
|
Customers who bought this product also bought :
|
|
|
|
|
|
|
|
|
![Z3X EASY JTAG PLUS [ FULL VERSION ]](files/cache/7021339d6ba8d9ddad31cd0c374baa5c.jpg){kind=small}
